KENOTEK COMPOUNDS & POLISHES
KENOTEK CORRECTION SYSTEM is the result of a developed research on the latest generation of water-based compounds & polishes, the high viscosity and innovation of Engineered Abrasive Technology enabling results that were previously unimaginable. The products are characterized by ease of use, fast results, great performance and a glossy finish. Little product is enough to work on wide surfaces for a long time, even with strong pressure. Using the polisher with the correct pad emphasizes the powerful abrasive action of the product, easily removing paint defects, deep scratches and imperfections.
GENERAL NOTE: Always use a clean polishing pad to avoid unnecessary damage to surfaces. Clean the pad on a regular base using the cleaning brush to remove dried product from the pads. A safety data sheet is available on request.
750 ml bottles are available per 6 in a cardboard box, 250 ml bottles are available per 12 in a cardboard box.
EAT 100 | ULTRA CUTTING MAX
DESCRIPTION
Ultra-fast compound to remove extremely weathered or damaged paint and sanding stains of grit P 1000. Due to the unique and homogeneous abrasive grain of our Engineered Abrasive Technology, this polishing process ensures a fast and optimal result. Can be used on all (including scratch-resistant) fresh and cured paint. Does not contain silicones or solvents.
DIRECTION OF USE
We recommend the gray microfiber pad, wool pad or green pad for processing. Apply sufficient EAT 100 to the polishing pad or paint surface, distribute at low
speed, approx. 1200 rpm, on the paint surface and then polish at approx. 1800 rpm plus moderate pressure to the desired result.
Available in 250 ml and 750 ml
EAT 150 | FAST ONE STEP CUTTING & POLISH
DESCRIPTION
Unique One-step polishing / high-gloss polishing to remove fine scratches and sanding stains from grit P 1500 or finer in one step. Hologram free! The unique sanding grain from our Engineered Abrasive Technology in the fine abrasive paste continuously grinds so fine during processing that, despite the high grinding performance, a perfect end result is achieved in just one polishing step, silicone and solvent-free. EAT 150 is suitable for all commercially available paint systems,
including scratch-resistant paints.
DIRECTION OF USE
For processing we recommend using the wool pad, orange polishing pad, hybrid pad, gray microfiber pad or the white microfiber pad. Apply sufficient EAT 150 to the polishing pad or paint surface. Distribute at low speed, approx. 1200 rpm, on the paint surface and then start polishing at approx. 1800 rpm plus moderate pressure until desired result.
Available in 250 ml and 750 ml
EAT 300 | ULTRAFINE CUTTING CERAMIC POLISH
DESCRIPTION
To effectively remove holograms and swirls. A unique abrasive grain of our Engineered Abrasive Technology guarantees a 100% hologram-free paint surface. The ceramic particles in the product also provide an superior gloss boost! Does not contain silicones nor solvents. Can be used on all (including scratch-resistant) fresh and cured paints.
DIRECTION OF USE
We recommend the yellow polishing pad or white microfiber pad for processing. Apply sufficient EAT 300 to the polishing pad or paint surface. Distribute at low speed, approximately 1200 rpm, on the paint surface and start polishing at approximately 1800 rpm plus moderate pressure to a high gloss. Remove the remaining residue with a clean microfiber cloth.
Available in 250 ml and 750 ml
EAT 500 | PRO WAX
DESCRIPTION
EAT 500, the perfect deep gloss finish for extra paint protection. The ultrafine Engineered Abrasive Technology guarantees a 100% smooth paint surface. The PTFE layer-emulsion seals and protects the paint surface. Can be used on ALL cured paints.
DIRECTION OF USE
We recommend the black pad or manually the orange microfiber pad for processing. Apply sufficient EAT 500 to the polishing pad or paint surface. Spread over the paint surface at a low speed, approximately 1200 rpm and then at approximately 1600 rpm plus moderate pressure. Let dry for a few minutes and then polish to a high gloss, manually with a microfiber cloth. Recommendation: Use an eccentric polisher for a fast and optimal finish.
Available in 250 ml and 750 ml
EAT 800 | CERAMIC SEAL
DESCRIPTION
The perfect sealer & gloss booster for extremely durable paint protection. The ceramic and polymer emulsion seals and protects the paint surface for months. Can be used on all cured paints. Does not leave any residue on plastic.
DIRECTION OF USE
For processing we recommend the black polishing pad or the orange microfiber pad for manual use. Apply generously EAT 800 to the polishing pad or directly on the paint surface. Spread at low speed, approximately 1000 rpm, over the paint surface plus moderate pressure. After the application, allow the product to adhere for at least 30 to 60 minutes and then buff with a microfiber cloth.
Available in 250 ml
KENOTEK PADS
We offer a broad range of pads, that are especially designed to repair the lacquer imperfections of your vehicle, even for heavy scratches!
ROTARY PADS
These pads are suitable for rotary polishers and can remove scratches, oxidation and much more!
DUAL ACTION PADS
The dual action pads have been designed for dual action polishing machines. They will remove scratches, holograms and other imperfections in the lacquer.
CLAYING
Our clay pad is ideal to remove embedded dirt or tenacious spots on your lacquer, such as tree sap.
The Kenotek Clay Pad is designed for fast and professional results, without concessions. With the use of a DA orbital polisher it safely removes all contaminants such as brake dust, paint overspray, water spots and tree sap from automotive paints, glass and plastics. The clay pad and the handle are available separately.
Silicone free, ready-to-use lubricant, to be used in combination with Kenotek Clay Pad. For the removal of the deepest layer of contaminants in a fast, easy and safe way. SHAKE WELL BEFORE USE!
